Customization: | Available |
---|---|
After-sales Service: | 12 Months |
Warranty: | 12 Months |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
High Speed Soft PVC water stop tie production line
Feeder | • To feed material into extruder; |
Extruder | • World famous brand electrical component: Siemens, Schneider, ABB etc; • High torque gearbox with adopts NSK/SKF bearing; • Siemens/WEG original motor achieved global after service; • Bimetallic screw and barrel; • Intelligent PLC controlling system with human-friendly interface. |
Die head | • 3Cr13/3Cr17 material • Complete set include extrusion die head, calibrator and cooling tank • Adopt to single, co-extrusion, foam imitation marble profile |
Calibration table | • Include full set of vacuum and water pump • Width: 240mm • Length: 6000mm • Independent operation panel for easy operation |
Haul off | • Upper/lower caterpillar driven separately and speed control by inverter • Fast change type pads for easy operation • Install plate is adopts aluminum material |
Cutter | • Lifting saw cutter with adopts double station dust collection system • Synchronous drivingby air cylinder or servo motor control |
Stacker | • Stainless steel304 as touching material • Discharge driving by air cylinder |
Hot stamping machine | • Decorative pattern and film protection of product surface |
SJSZ65/132 Conical Twin Screw Extruder
|
Vacuum Calibration Table
|
Caterpillar Haul-off Machine
|
|||
Suit plastic material
|
PVC powder
|
Material
|
Stainless steel
|
Traction speed
|
1-10 m/min
|
Extrusion capacity
|
250kg/h
|
Center height
|
250 kg
|
Power of traction motor
|
1.5 kw
|
Screw
|
Length:1440mm Diameter:65/132mm Rotary speed of screw:35rpm |
Adjusting manner
|
Tri-dimension adjusting
|
Effective length of drive
|
800 mm
|
Vacuum exhaust system
|
1.5kw
|
Vacuum rate
|
0-0.09Mpa
|
Timing method of drive motor
|
Frequency conversion
|
Oil pump
|
Oil heating(0.75kw)
|
Dimension
|
3000 x 1100 x 1200mm
|
Center height
|
1000 mm
|
Extruder diemension
|
4250 x 1550 x 2450 mm
|
/
|
/
|
Air pressure
|
≥0.6 MPa
|
Weight
|
3000 kg
|
/
|
/
|
Dimension
|
1200 x 800 x 1600 mm
|
Machine picture:
-Conical twin screw Extruder
-Mould
-Stainless steel vacuum calibration platform
-Caterpillar haul-off and Cutter
-Stacker