| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
silicone rubber TPU PU TEP TPV TPR Plastic profile sealing strip extrusion production line
Extrusion Equipment:Single screw extruder adopts special high efficient screw, which has high screw speed, yield and plastic capacity.
Extrusion Mould:The special head used in the design of raw material characteristic has the characteristics of uniform material discharging, convenient adjustment, eliminating the extrusion weld mark and so on.
Vacuum Setting Device:The contact parts are made of stainless steel.
Tractor:Two jaw belt type high speed traction machine, it adopts frequency conversion stepless speed regulation to meet the requirements of pipe production for traction stability.
Precision Pneumatic Cutting Machine or Automatic Coiling Machine:According to the requirements of automatic cutting- off or close the sealing strip, it can reduce labor intensity, improve production efficiency.
There are a variety of electrical control systems for selection(such as: PLC automation control system), the characteristics are fast production, stable, simple and easy to operate.
Main Technical Parameters:
| Item | Technical parameter |
| I. SJ65/25 Single Screw Extruder | |
| Supplier of electric control cabinet | Main transducer and feeder's transducer: Hitachi transducer; Air switch: |
| Output capacity | 80kg/h(approximate) |
| Inlet wire terminal of power source | 3-phase, 4-wire system |
| Motor power | Main motor:AC30kw |
| Temperature control curve type | Temperature fluctuating self-adjustment(PID type) |
| Temperature control meters, manometers and speedometers | RKC(Japan) temperature control system, Xiaogan Wuyue(China) sensor and high quality speedometers respectively. |
| Pressure display | With melt pressure display |
| Feeder type | Vacuum feeder(with drier), with enganced screw feeder |
| Connection of die head with flange | By bolts |
| The advantages over other companies in this field | Good shearing, high output, reasonable design, high accuracy and easy control, high-grade materials and parts with steadfast performance. |
| 1. Screw | |
| Diameter | 65mm |
| LD | 25:1 |
| Quantity | 1pcs |
| With gas vent or not | With |
| 2. Barrel | |
| Barrel type | Integer |
| Heating method | Air cooling unit. Special stainless cover and red copper electricity heater are used on the barrel |
| Heating zones | 7-zone |
| Total heating power | 60kw(approximate) |
| Temperature range | 50~300 |
| Cooling zones | 7-zone |
| Cooling system | 7X0.55kw |
| Cooling medium | Air cooling |
| Screw and barrel manufacturer | Zhejiang Machinery Co., Ltd |
| Quality guarantee | Testing block and tested report are available. Guaranteed period is more than 10,000 working hours |
| Nitrid depth | 0.6~0.7mm |
| 3. Driving system and speed reducing system | |
| Main driving motor power | 18.5kw |
| Main motor working method | 3-phase asynchronous motor, connected to the gearbox by couple |
| Main motor rotating speed | |
| Gearbox type | Helical gear, hardened |
| Gears | Carburized and ground; The material is 20CrMoTi |
| Main motor speed-adjusting method | AC transducer |
| II.Haul-off unit | |
| Haul-off speed | 20-30m/min(adjustable) |
| Speed control method | Inverter |
| Motor power | 0.75kwX2 |
| III. Single disc winder | |
| Winding range | 15-25mm |
| IV. Mould | 1 set |
Machine Photo :
If you want to know more about the machine, pls contact us
){kind=link}